Cover flux aluminium (SATA-PF-340)

General Description of Cover Flux (SATA-PF-340)

The aluminium melt is extremely easy oxidation and inhale when it is in melting. A flux is required to have low melting, low density, good humidity, and can form a dense uniform protective film, which we called it covering flux.

SATA-cover flux is used for covering of molten aluminium, it can form a cover layer on the surface of molten for prevent the molten aluminium react to oxidation.

Application of Cover Flux (SATA-PF-340)

Use Instruction: it can added at one time before refining or it can added in two batches,first add half cover flux to the molten aluminium and stir the melt and make the flux fully react to molten, then skimming the dross and spread the balance on the surface of the flux for aluminum melting.

Advantage of Cover Flux (SATA-PF-340)

It can prevent the aluminium molten react with oxygen in the air.

It is a eco-friendly flux, less fume during working

It can separate the dross from aluminium molten, reduce metal loss

Low working temperature, suitable for kinds of furnace

Specification of Cover Flux (SATA-PF-340)

White mixed powder.

Aluminium melting temperature: 650-750℃.

Recommended Dosage: 1.5-3kgs/ton aluminium molten, 0.8-1.0kg/m2 of melt area. it should adjust according to the purity and air humidity.

Package:

Packed in 5kg (PE), 25kg (PP), 1000kg bags or customized

Stored in dry, well-ventilated place, and avoid direct sunlight,keep sealed before using.

Package of Cover Flux (SATA-PF-340)

Packed in 5kg (PE), 25kg (PP), 1000kg bags or customized.

Stored in dry, well-ventilated place, and avoid direct sunlight,keep sealed before using.

NOTE: This flux has serious hygroscopicity, please use immediately after opening.